Item Name：ANLAN HOT blackhead remover
Weight: About 120g
Hot compress: About 40℃
Power: About 5W
Suction Level: 53kpa、58kpa、63kpa
Battery capacity: 500mAh lithium-ion battery
Charging time: About 90 minutes
VACUUM NEGATIVE PRESSURE
3D vacuum suction method, Cleansing your skin vacuum negative pressure.
Hot Compress Function
Hot compress function opens pores, Decontamination is more thorough. Before use, open the pores by warming at 40 ° C, Equipped with silicone, anti-scalding design, more secure.
3 Replaceable Probes
Big Size Circular head For strong suction, remove blackheads or whiteheads, grease, cosmetic residue etc and mainly used on your T-Zone area or other face area except around the eyes. Small round hole head The suction is less suction compared to big hole head, more suitable for sensitive, thin skin, blackhead less skin. Oval head Use in the corners of the nose and mouth. It can also be used on the neck and other parts.
3 Suction Heads
It’s suitable for different skin types. Help you easily solve all facial problems, like blackhead, acne, coarse pore, rough skin, dark skin, dead skin.
3 Suction Level
Oily mode-Low level: Suitable for thin areas of eyelids and lips.
Neutral mode-Medium level: Suitable for the lower jaw, remove dark spots deeply.
Dry mode-High level: Suitable for stubborn blackheads, applies to areas with high sebum secretion (nose, forehead, T zone)
40℃ Hot compress
It makes it easier to remove pores by opening the pores in the 40 ℃ thermal mode.
You can check the remaining battery level and mode with a simple LED display.
You can charge by connecting the product with a computer, mopile power supply or other devices.
1.Clean your face and keep it dry.
2.Put the silicone cover on the nose, press the hot button to open your pores with hot compress. (5 minutes)
* Do not use the hot mode and suction mode at the same time.
* For first time, try to use the lower level to test because of different skin types. Short and fast shots and repel blackheads horizontally(Better using blackhead export liquid).
3.Press power / mode button briefly to adjust the suction level. Apply the suction device to the skin and slide it sideways to pull out blackhead from the pores. * Please set it to low level Oily mode when using for the first time. Adjust the level after you get used to the low level.
* Please do not stay in one place for more than 3 seconds. There is a possibility of becoming red.
4.After pulling out the pores, clean the face and remove suction head.
* Do not wash the body of the suction device with water.
5.After cleaning, use skin care products like facial mask, cream for maximum effect. (remember to use ice towel or cold water to minimize the pores and reduce the irritation)